What GIS Data Do You Need for a Florida ERP Application?

If you're preparing a Florida Environmental Resource Permit (ERP) application, assembling the right GIS data early is one of the most important steps you can take. The right layers tell the story of your site — its wetlands, hydrology, soils, land cover, and surrounding regulatory context — before a single boot hits the ground.

This guide breaks down every GIS dataset you'll need, what it shows, and why it matters for ERP review by FDEP or your applicable Water Management District.

What Is the Florida ERP Program?

The Environmental Resource Permit (ERP) program is Florida's primary regulatory mechanism for protecting wetlands and surface waters. It is administered jointly by the Florida Department of Environmental Protection (FDEP) and five Water Management Districts: St. Johns River, South Florida, Southwest Florida, Suwannee River, and Northwest Florida.

Any project involving dredging, filling, construction in wetlands, or alteration of surface water flows typically requires an ERP. The permit standard requires that activities do not adversely impact water quality, water quantity, or the functions wetlands provide to fish, wildlife, and listed species.

GIS data plays a central role throughout the ERP process — from initial site screening and wetland delineation to mitigation planning and permit exhibit preparation.

Required GIS Datasets for an ERP Application

1. National Wetlands Inventory (NWI)

The NWI, maintained by the U.S. Fish & Wildlife Service, is the baseline wetland mapping layer for any ERP project. It classifies wetlands and deepwater habitats by type — palustrine, estuarine, riverine, lacustrine, and marine — using the Cowardin classification system.

While NWI is not definitive for regulatory jurisdictional determinations, it is a required exhibit in most ERP applications and provides the starting point for wetland delineation field work. Reviewers use it to cross-check field-delineated boundaries against mapped features.

2. Hydric Soils (SSURGO)

The USDA Natural Resources Conservation Service (NRCS) Soil Survey Geographic Database (SSURGO) contains hydric soil designations for Florida. Hydric soils are one of the three criteria used to identify jurisdictional wetlands under both state and federal methodology.

For ERP applications, hydric soil mapping supports the wetland delineation narrative and helps explain the boundaries drawn in the field. It is also used in UMAM (Uniform Mitigation Assessment Method) functional assessments.

3. FLUCCS Land Use and Land Cover

The Florida Land Use, Cover and Forms Classification System (FLUCCS) is the statewide land cover classification used by Florida's Water Management Districts. FLUCCS codes identify habitat types across the landscape and are essential for characterizing existing site conditions in an ERP application.

FLUCCS data is also used directly in UMAM scoring, where the existing condition of wetland vegetation communities must be documented and classified. Reviewers expect FLUCCS-coded mapping on ERP exhibits.

4. FEMA Flood Zones (National Flood Hazard Layer — NFHL)

FEMA's National Flood Hazard Layer identifies Special Flood Hazard Areas (100-year floodplain), floodways, and flood zone designations across Florida. ERP applications involving fill or construction near surface waters require documentation of flood zone status.

Projects within a floodway or AE zone face additional scrutiny, and compensating storage calculations may be required. Including FEMA flood zone boundaries in your site exhibit package is standard practice.

5. FDEP ERP Permit Boundaries and Existing Permits

Mapping existing ERP permits in and around your project area provides critical context for reviewers. It shows cumulative impact history, proximity to previously permitted impacts, and whether mitigation has already occurred nearby.

FDEP's geodata portal provides spatial data on permitted ERP projects, which should be clipped to your project area and included in the application package.

6. Surface Water Classifications

Florida classifies its surface waters under Rule 62-302, F.A.C., into five classes based on designated use — from Class I (potable water supply) through Class V (navigation). These classifications affect permitting thresholds, water quality standards, and the level of review your project receives.

Knowing the classification of any water body your project may affect is essential for scoping the ERP and drafting the water quality narrative.

7. FWC Listed Species Habitat

The Florida Fish and Wildlife Conservation Commission (FWC) maintains GIS layers for state-listed species habitat, including Florida panther consultation zones, gopher tortoise habitat, Florida scrub-jay habitat, and wading bird nesting areas.

ERP applications require an assessment of potential impacts to listed species. Mapping these layers against your project footprint early in the process helps identify whether species surveys will be required and flags potential permit conditions.

8. FNAI Managed Areas and Conservation Lands

The Florida Natural Areas Inventory (FNAI) managed areas layer shows conservation lands, wildlife management areas, aquatic preserves, and state parks. Proximity to managed areas can trigger additional review and may affect mitigation credit availability.

It also provides context for cumulative impact analysis — reviewers consider the landscape setting of a project relative to surrounding conservation lands.

9. Outstanding Florida Waters (OFW) and Aquatic Preserves

Waters designated as Outstanding Florida Waters (OFW) carry the highest level of protection under state law. Projects that discharge to an OFW or are located within an Aquatic Preserve face a stricter no-degradation standard.

Identifying OFW designations and Aquatic Preserve boundaries early can fundamentally change your permitting strategy and mitigation requirements.

Where to Get All of This Data in One Place

Pulling these datasets from a dozen different agency portals — FDEP, FWC, FNAI, FEMA, NRCS, USFWS — is time-consuming and error-prone. Agency URLs change, download formats vary, and keeping everything current is a project in itself.

FL GIS Data consolidates all of these layers into a single organized download, verified against current agency sources, and structured around Florida's permitting workflows. Whether you're screening a new project or preparing a full ERP submittal package, you can download what you need in minutes.