GIS Layers Required for a Florida Mitigation Bank Prospectus

Establishing a mitigation bank in Florida is one of the most data-intensive processes in environmental permitting. Before the first site visit or agency meeting, you need GIS to evaluate whether a site is viable, define the service area, characterize baseline conditions, and build the spatial exhibits required for the Mitigation Banking Instrument (MBI).

This guide covers every GIS layer you need to support a Florida mitigation bank prospectus and MBI submission — what each layer does, why agencies want to see it, and how to get it efficiently.

What Is a Florida Mitigation Bank?

A mitigation bank is a site where wetlands, streams, or other aquatic resources are restored, enhanced, established, or preserved for the purpose of providing compensatory mitigation credits for permitted impacts elsewhere. In Florida, mitigation banks are permitted jointly under Section 404 of the Clean Water Act (Army Corps of Engineers) and the state ERP program (FDEP or applicable WMD).

The process begins with a prospectus — a preliminary document submitted to the Interagency Review Team (IRT) that describes the proposed bank site, its restoration potential, and the geographic service area within which credits would be sold. GIS is central to every section of the prospectus.

GIS Datasets Required for a Mitigation Bank Prospectus

1. HUC Watershed Boundaries (USGS WBD)

The USGS Watershed Boundary Dataset (WBD) defines the hydrologic unit codes (HUCs) at the 8-digit and 12-digit level. Mitigation bank service areas are defined by HUC boundaries — typically HUC-8 or HUC-10 — and must be justified ecologically based on watershed connectivity.

The prospectus must identify which HUC units fall within the proposed service area and explain why the bank site is hydrologically and ecologically appropriate for that watershed.

2. National Wetlands Inventory (NWI)

NWI mapping provides the baseline characterization of wetland types present on and surrounding the bank site. The prospectus must describe existing wetland conditions and their relationship to the proposed restoration strategy.

NWI also helps establish the ecological context — whether the bank site is embedded in a larger wetland landscape or isolated by development — which directly affects the IRT's assessment of restoration potential and long-term viability.

3. SSURGO Hydric Soils

Hydric soil mapping is critical for establishing that the bank site has the soil conditions to support wetland restoration. Sites with mapped hydric soils have a stronger baseline case for restoration success, particularly for herbaceous and forested wetland types.

SSURGO data should be used in the prospectus to characterize soil series across the bank site, identify hydric map units, and support the hydrology restoration narrative.

4. FLUCCS Land Use and Land Cover

FLUCCS mapping documents the existing condition of vegetation communities across the bank site. This is the foundation for the UMAM baseline assessment, which determines how many credits the bank can generate.

Existing FLUCCS conditions — whether a site is degraded pasture, drained cypress, or already functioning wetland — directly determine the uplift potential and therefore the credit yield of the bank.

5. Surface Water Classifications and Outstanding Florida Waters

Surface water classifications and OFW designations tell you the regulatory status of any water bodies within or adjacent to the bank site. Banks located in watersheds draining to OFWs or Class II waters carry additional restoration value and may command premium credit pricing.

This mapping also informs the hydrology restoration narrative — what water quality standards must the restored wetland meet, and how does that affect design?

6. FEMA National Flood Hazard Layer (NFHL)

Flood zone mapping provides essential hydrologic context for the bank site. Sites within the 100-year floodplain have natural hydrologic connectivity that supports wetland restoration, while sites outside the floodplain may require more intensive hydrologic manipulation.

FEMA flood zone boundaries are also relevant to Section 404 jurisdiction analysis and to understanding how the bank site relates to the surrounding flood storage landscape.

7. FWC Listed Species Habitat

Mitigation banks that provide habitat for state-listed species carry additional ecological value and can sometimes generate species-specific mitigation credits in addition to wetland credits. The prospectus should identify what listed species habitat is mapped on or near the bank site.

FWC layers to include: panther consultation zones, Florida scrub-jay habitat, wading bird nesting colonies, gopher tortoise habitat, and Florida black bear zones, as applicable to the site location.

8. FNAI Managed Areas and Conservation Lands

Proximity to existing conservation lands significantly enhances a bank site's ecological value and IRT receptivity. A bank site adjacent to or buffering a state forest, wildlife management area, or aquatic preserve demonstrates landscape connectivity and long-term viability.

FNAI managed areas mapping should be included in the prospectus to show the site's position within the broader conservation landscape.

9. FDEP ERP Permits and Existing Mitigation Banks

Mapping existing mitigation banks and their service areas within your proposed service area is essential — and often the most strategically important analysis in the prospectus. The IRT will scrutinize whether the market area is already adequately served by existing banks.

FDEP ERP permit data also shows historical impact activity in the watershed, which helps project the demand for mitigation credits in your service area.

10. Aquatic Preserves

Florida's Aquatic Preserves are state-managed areas protecting submerged lands and associated resources. Bank sites adjacent to or within Aquatic Preserve buffer areas carry high ecological significance and may be subject to additional review from the Office of Resilience and Coastal Protection.

Mapping Aquatic Preserve boundaries relative to the bank site is required for coastal and estuarine bank proposals.

11. Soils and Topography (LiDAR-Derived Elevation)

Beyond hydric soil mapping, detailed topographic data is critical for evaluating hydrologic restoration potential. LiDAR-derived digital elevation models (DEMs) allow you to model water flow paths, identify historic drainage features, and design control structures.

Florida's statewide LiDAR coverage, available through FDEP and the Florida Division of Emergency Management, provides the topographic foundation for all hydrology restoration design in a mitigation bank prospectus.

Building the Service Area Map

The service area is the geographic boundary within which the bank can sell credits to offset permitted impacts. Defining it requires overlaying:

  • HUC watershed boundaries (primary constraint)
  • Existing bank service areas (competitive context)
  • County boundaries (sometimes used as secondary constraints)
  • Ecological watershed divides (physiographic justification)

The service area map is one of the most scrutinized exhibits in the prospectus. It needs to be defensible both ecologically and competitively.

Exhibits Typically Required in a Florida MBI

Based on standard IRT expectations, your GIS data package should produce the following map exhibits at minimum:

  • Regional Location Map — site in state/county context
  • Site Boundary Map — legal boundaries, property lines, roads
  • Existing Conditions Map — FLUCCS-coded vegetation communities
  • Wetlands Map — NWI and field-delineated wetlands
  • Hydric Soils Map — SSURGO hydric map units
  • Flood Zones Map — FEMA NFHL overlay
  • Listed Species Habitat Map — applicable FWC layers
  • Conservation Lands Context Map — FNAI managed areas, proximity
  • Watershed / Service Area Map — HUC boundaries, proposed service area
  • Existing Mitigation Banks Map — competitor banks and service areas
  • Surface Water Classifications Map — water body designations

Producing all of these from scratch, sourcing each dataset from a different agency portal, is a multi-day effort. With a consolidated Florida GIS data package, it becomes a matter of hours.

Get Every Layer You Need in One Download

FL GIS Data provides all of the datasets listed above — NWI, SSURGO, FLUCCS, FEMA NFHL, WBD, FWC species habitat, FNAI managed areas, surface water classifications, aquatic preserves, OFWs, and FDEP ERP permits — in a single organized download, verified against current agency sources and structured for Florida permitting workflows.

Whether you're evaluating a prospective bank site or assembling the full MBI exhibit package, start here.